Bauer BG 15 Rotary Drilling rig

[info]The Komatsu excavator is used for setup works for pilling rigs or light weight pile driving and anchoring or pining[/info]

We use this for:

  • Earth works
  • Pier drilling
  • Sheet pilling
  • 8 m light weight steel / polymer sheets
  • Or 12 m side mounted hammer
  • Ground anchoring pins and screw anchors

[info]The Woltman 90DR rotary drilling rig has an operating weight of approx. 102 t.[/info]

It is ideally suited for:

  • Drilling cased boreholes ( installation of casing by rotary drive or optionally by hydraulic oscillator – both are powered by the drilling rig )
  • Drilling uncased deep boreholes that are stabilised by drilling fluid
  • Drilling boreholes with long hollow stem augers (CFA system), with or without kelly extensions
  • Special drilling systems, such as FOW piles, double rotary head drilling (“cased CFA system”), displacement piles, soil mixing system (CSM and SMW)

Drilling processes with standard equipment

  • Sheet piling up to 36m
  • CFA drilling (pre-equipped with hydraulic and electric installations) up to 34m
FDP Full-Displacement-Piling (pre-equipped with hydraulic and electric installations) up to 45 m
  • Double rotary head drilling up to 30m

[info]The BG 27s rig has an operating weight of approx. 95 to.[/info]

It is ideally suited for:

  • Drilling cased boreholes ( installation of casing by rotary drive or optionally by hydraulic oscillator – both are powered by the drilling rig )
Crowd winch type.
  • Drilling uncased deep boreholes that are stabilised by drilling fluid.
  • Drilling boreholes with long hollow stem augers (CFA system), with or without kelly extensions.
  • Special drilling systems, such as FOW piles, double rotary head drilling (“cased CFA system”), displacement piles, soil mixing wall system (SMW).
  • CFA up to 32.5 m.
  • Kelly drilling up to 52 m.
  • Sheet piling up to 27 m.
  • Double Rotary drilling up to 25.5 m.
  • FDP drilling up to 26 m.

[info]The Bauer RG 21T rig has an operating weight of approx. 71 t.[/info] It is ideally suited for:

  • Drilling cased boreholes ( installation of casing by rotary drive or optionally by hydraulic oscillator – both are powered by the drilling rig )
  • Drilling uncased deep boreholes that are stabilised by drilling fluid
  • Drilling boreholes with long hollow stem augers (CFA system), with or without kelly extensions
  • Special drilling systems, such as FOW piles, double rotary head drilling (“cased CFA system”), displacement piles, soil mixing system (CSM and SMW)

Drilling processes with standard equipment

  • Sheet piling up to 19m
  • 
CFA drilling (pre-equipped with hydraulic and electric installations) up to 18m
  • Double rotary head drilling up to 16m

[info]The Bauer RG19 rig has an operating weight of approx. 60.5 t.[/info]

It is ideally suited for:

  • Drilling cased boreholes ( installation of casing by rotary drive or optionally by hydraulic oscillator – both are powered by the drilling rig )
  • Drilling uncased deep boreholes that are stabilised by drilling fluid
  • Drilling boreholes with long hollow stem augers (CFA system), with or without kelly extensions
  • Special drilling systems, such as FOW piles, double rotary head drilling (“cased CFA system”), displacement piles, soil mixing system (CSM and SMW)

Drilling processes with standard equipment

  • Sheet piling up to 19m
  • CFA drilling (pre-equipped with hydraulic and electric installations) up to 18m
  • Double rotary head drilling up to 16m

[info]The BG 36 rotary drilling rig has an operating weight of approx. 127 to.[/info]

It is ideally suited for:

  • Drilling cased boreholes ( installation of casing by rotary drive or optionally by hydraulic oscillator – both are powered by the drilling rig )
  • Drilling uncased deep boreholes that are stabilised by drilling fluid
  • Drilling boreholes with long hollow stem augers (CFA system), with or without kelly extensions
  • Special drilling systems, such as FOW piles, double rotary head drilling (“cased CFA system”), displacement piles, soil mixing system (CSM and SMW)

Drilling processes with standard equipment

  • Kelly drilling (without casing oscillator)
  • CFA drilling (pre-equipped with hydraulic and electric installations)
  • FDP Full-Displacement-Piling (pre-equipped with hydraulic and electric installations)

[info]The BG 28 rotary drilling rig has an operating weight of approx. 95 to.[/info]

It is ideally suited for:

  • Drilling cased boreholes ( installation of casing by rotary drive or optionally by hydraulic oscillator – both are powered by the drilling rig )
    Crowd winch type
  • Drilling uncased deep boreholes that are stabilised by drilling fluid
  • Drilling boreholes with long hollow stem augers (CFA system), with or without kelly extensions
  • Special drilling systems, such as FOW piles, double rotary head drilling (“cased CFA system”), displacement piles, soil mixing wall system (SMW)

Drilling processes with standard equipment

  • Kelly drilling (without casing oscillator)
  • CFA drilling (pre-equipped with hydraulic and electric installations)
  • FDP Full-Displacement-Piling (pre-equipped with hydraulic and electric installations)

[info]The BG 15 H rotary drilling rig has an operating weight of approx. 49 to.[/info]

It is ideally suited for:

  • Drilling cased boreholes ( installation of casing by rotary drive or optionally by hydraulic oscillator – both are powered by the drilling rig )
  • Drilling uncased deep boreholes that are stabilised by drilling fluids
  • Drilling boreholes with long hollow stem augers (CFA system), with or without kelly extensions
  • Special drilling systems, such as FOW piles, displacement piles

Drilling processes with standard equipment

  • Kelly drilling (without casing oscillator)
  • CFA drilling (pre-equipped with hydraulic and electric installations)
  • FDP Full-Displacement-Piling (pre-equipped with hydraulic and electric installations)

Assessment Package

Have you covered all bases ?